6Sh8 slurry pump
The 6Sh8 pump is intended for mixtures with a density of 1,000–1,250 kg/m³, a solids volume concentration of up to 25%, and particles no larger than 20 mm.
The permitted medium temperature is +4 to +50 °C and the pH range is 6–8. The mass of 420 kg and the dimensions in the table exclude the electric motor.
Technical specifications and permit for use
Manufactured in Ukraine by GORMAK in accordance with
The company holds Permit No. 0027.21.94 issued by the State Labour Service of Ukraine for the use of pumps and units based on them manufactured in accordance with these technical specifications.
Technical specifications
| Parameter | Unit | Value |
|---|---|---|
| Flow rate | 250 | |
| Head | 50 | |
| Efficiency, min. | 64 | |
| Recommended motor power, max. | 90 | |
| Rotation speed | 1500 | |
| Overall dimensions (L × W × H) | 1095 × 700 × 695 | |
| Mass, max. | 420 | |
| Maximum particle size | 20 | |
| Medium temperature | +4…+50 | |
| pH value | 6–8 |
More in this category
Slurry pump ShN-50/25, ShN-80/19ShN 50-25 centrifugal slurry pump rated 50 m³/h for slurry water at coal preparation plants.
Slurry pump ShNM-50ShNM-50 centrifugal slurry pump rated 50 m³/h for slurry water at coal preparation plants.
Slurry pump ShN-250 (ShN-270)ShN 250-34 centrifugal slurry pump for slurry water, flotation tailings and magnetite suspensions with solids up to 400 g/l.
- Slurry pump ShN 400-40 (GrAT 400-40)
ShN 400-40 slurry pump rated 400 m³/h at 40 m head, wetted parts in wear-resistant cast iron at 56–63 HRC.