Coal pump NUV-450 (U450-120)
The NUV 450/120 high-head coal pump is designed for pumping chemically neutral coal-water slurry (pH = 6÷8) with a maximum particle size of 70 mm, a solid-to-liquid mass ratio of no more than 1:3, and a rock content in the solid phase of 15 % to 40 %, at temperatures from +1 °C to +50 °C.
Technical specifications and permit for use
Manufactured in Ukraine by GORMAK in accordance with
The company holds Permit No. 0027.21.94 issued by the State Labour Service of Ukraine for the use of pumps and units based on them manufactured in accordance with these technical specifications.
Technical specifications
| Parameter | Unit | Value |
|---|---|---|
| Flow rate | m³/h | 450 |
| Head | m | 120 |
| Permissible suction lift | m | 7,3 |
| Efficiency, min. | % | 65 |
| Recommended motor power, max. | kW | 245 |
| Rotation speed | rpm | 1485 |
| Line frequency | Hz | 50 |
| Supply voltage | V | 6000 |
| Suction port diameter | mm | 250 |
| Discharge port diameter | mm | 140 |
| Overall dimensions (L × W × H) | mm | 1862 × 985 × 1026 |
| Mass, max. | kg | 2000 |
| Maximum particle size | mm | 70 |
| Solid-to-liquid mass ratio, max. | — | 1:3 |
| Rock content in solid phase | % | 15–40 |
| pH value | — | 6–8 |
| Medium temperature | °C | +1…+50 |
Repair and servicing for this equipment
- Slurry pump and coal pump repair
Repair of slurry and coal pumps, including wetted-end restoration with a silicon-carbide composite.
More in this category
Coal pump 12U10-M12U10-M coal pump rated 900 m³/h at 85 m head, for coal-water slurry with particles up to 90 mm.
- Coal pump U900-90
U900-90 coal pump rated 900 m³/h at 90 m head, for chemically neutral hydraulic mixtures.
- Coal pump 12U6
High-head 12U6 coal pump: 900 m³/h at 175 m, for hydraulic hoisting of coal-water slurry.