8С-8
Suspension pump 8S-8
The 8S-8 pump is designed for pumping magnetite suspensions with a density of up to 2200 kg/m³ and a maximum solid particle size of 20 mm.
Normal operation is assured when pumping neutral liquid (pH = 6…8) at a temperature of no more than 60 °C.
Technical specifications and permit for use
Manufactured in Ukraine by GORMAK in accordance with
ТУ У 28.1-38164000-003:2013PUMPS AND ELECTRIC PUMP UNITS BASED ON THEM
The company holds Permit No. 0027.21.94 issued by the State Labour Service of Ukraine for the use of pumps and units based on them manufactured in accordance with these technical specifications.
Technical specifications
| Parameter | Unit | Value |
|---|---|---|
| Flow rate | m³/h | 360 |
| Head | m | 42 |
| Efficiency, min. | % | 64 |
| Recommended motor power, max. | kW | 160 |
| Rotation speed | rpm | 1000 |
| Impeller diameter | mm | 545 |
| Suction port diameter | mm | 200 |
| Discharge port diameter | mm | 150 |
| Overall dimensions (L × W × H) | mm | 1160 × 610 × 590 |
| Mass, max. | kg | 1520 |
| Suspension density, up to | kg/m³ | 2200 |
| Maximum particle size | mm | 20 |
| pH value | — | 6–8 |
| Medium temperature | °C | до 60 |
Spare parts
| No. | Description | Drawing |
|---|---|---|
| 1 | Impeller | П. 4880.02.000 АБ-II |
| 2 | Base frame assembly | П. 4880.03.000 |
| 3 | Front cover | П. 4880.00.001 |
| 4 | Spiral casing | П. 4880.00.002 |
| 5 | Front liner | П. 4880.00.003 |
| 6 | Rear liner | П. 4880.00.004 |
| 7 | Self-sealing ring | П. 4880.00.008 |
| 8 | Roller bearing No. 6-366322 L1 | |
| 9 | Ball bearing No. 3622 — MPZ — No. 22322 ACMW33 |
Repair and servicing for this equipment
- Slurry pump and coal pump repair
Repair of slurry and coal pumps, including wetted-end restoration with a silicon-carbide composite.