Slurry pump ShN 1000-45
The ShN 1000-45 centrifugal slurry pump is designed for pumping slurry water, flotation tailings, filtrate, process water, and both on-spec and off-spec magnetite suspensions with a solids content of up to 400 g/l, a maximum particle size of 6 mm, and a medium temperature between +1 °C and +40 °C.
Technical specifications and permit for use
Manufactured in Ukraine by GORMAK in accordance with
The company holds Permit No. 0027.21.94 issued by the State Labour Service of Ukraine for the use of pumps and units based on them manufactured in accordance with these technical specifications.
Technical specifications
| Parameter | Unit | Value |
|---|---|---|
| Flow rate | m³/h | 1000 |
| Head | m | 45 |
| Rated motor power | kW | 250 |
| Rotation speed | rpm | 1500 |
| Efficiency, min. | % | 56 |
| Impeller diameter | mm | 470 |
| Overall dimensions (L × W × H) | mm | 1325 × 940 × 1010 |
| Mass, max. | kg | 1100 |
| Overall dimensions with motor (L × W × H) | mm | 2845 × 1170 × 1375 |
| Mass with motor, max. | kg | 2400 |
| Solids content, up to | g/l | 400 |
| Maximum particle size | mm | 6 |
| Medium temperature | °C | +1…+40 |
Repair and servicing for this equipment
- Slurry pump and coal pump repair
Repair of slurry and coal pumps, including wetted-end restoration with a silicon-carbide composite.
More in this category
6Sh8 slurry pump6Sh8 slurry pump with a flow rate of 250 m³/h and 50 m head, for mixtures containing particles up to 20 mm.
Slurry pump ShN-50/25, ShN-80/19ShN 50-25 centrifugal slurry pump rated 50 m³/h for slurry water at coal preparation plants.
Slurry pump ShNM-50ShNM-50 centrifugal slurry pump rated 50 m³/h for slurry water at coal preparation plants.
Slurry pump ShN-250 (ShN-270)ShN 250-34 centrifugal slurry pump for slurry water, flotation tailings and magnetite suspensions with solids up to 400 g/l.